Page 191 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05

Fascia Cover

Description:
The 1-3/4” and 4” Fascia Cover provides a professional
finish without perimeter welding. The fascia cover is to
®
be used in conjunction with the Duro-Last vinyl 1-3/4”
and 4” fascia bar.
 Manufactured from various metals (see chart
below) in 10’ lengths; 1-3/4” and 4” widths.
 End-notched to provide trouble-free piece-to-
piece interlocking.
 Ready-to-assemble inside and outside corners
are available in flat face.
 Both sizes available in flat face profiles.
Energy Efficiency:
®
®
LEED and ENERGY STAR compliant.

Installation:
1-3/4” Fascia Cover
1. A wood nailer is required if 1” or greater of
insulation is used.

2. This nailer should be attached to the wall in
accordance with ANSI/SPRI ES-1 3.9.

®
3. Install in accordance with EXCEPTIONAL
Metals detail drawings #3110, #3500, and
#3510.

4. Any deviation from the requirements set forth in
detail drawings must be pre-approved, in writing,
by the EXCEPTIONAL Metals Technical
Department.
Codes and Standards:
 ANSI/SPRI ES-1 Compliant with 24-gauge
®
Galvalume and .040 aluminum cover.
 Meets TAS 111-95 Test with 4” cover.

 FM Approved. 4” Fascia Cover
Warranty:

Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Material Gauge Finish ®
Technical Services: Aluminum .040 Mill or Kynar
Stainless Steel 24-gauge N/A
Product samples, detail sheets, color chips, and color Bonderized Steel 24-gauge N/A ®
®
chart are available for your submittal package. For Galvalume 24-gauge Mill or Kynar
assistance with questions or submittals, contact your Copper 16 oz. Mill
local representative or call EXCEPTIONAL Metals.

®
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. “LEED” is a trademark owned by the U.S. Green Building Council and is used with
permission. “ENERGY STAR” is a registered mark owned by the U.S. Government. ENERGY STAR is only valid in the United States. “Galvalume” is a registered mark owned by
BIEC International Inc. Revised 11/04/2015