Page 194 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05

4” Flex Fascia Cover

Description:
®
The 4” Flex Fascia Cover snaps onto the Duro-Last
vinyl 4” fascia bar. Pre-notched grooves every 1½”
allow fascia cover to snap over radial surfaces.
 Fabricated in 10’ lengths; 4” width.

 Can be installed on both inside and outside
radius edges.
 Manufactured from various metals (see chart
below).
 Manufactured in flat face profile.

Energy Efficiency:
®
®
LEED and ENERGY STAR compliant.

Installation:

1. Attach to a wood nailer.

2. This nailer should be attached to the wall in
accordance with ANSI/SPRI ES-1 3.9.

®
3. Install in accordance with EXCEPTIONAL
Metals detail drawings #3510 and #3511.

4. Any deviation from the requirements set forth in
detail drawings must be pre-approved, in writing,
by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Technical Services:

Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

Material Gauge Finish
®
Aluminum .040 Mill or Kynar
Stainless Steel 24-gauge N/A
Bonderized Steel 24-gauge N/A
®
®
Galvalume 24-gauge Mill or Kynar

®
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. “LEED” is a trademark owned by the U.S. Green Building Council and is used with
permission. “ENERGY STAR” is a registered mark owned by the U.S. Government. ENERGY STAR is only valid in the United States. “Galvalume” is a registered mark owned by
BIEC International Inc. Revised 11/04/2015