Page 196 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05
P. 196

Gravel Stop Cover



            Description:

            The 2” and 4” Gravel Stop Cover provides a
            professional finish that is used in conjunction with the
                    ®
            Duro-Last  2” and 4” vinyl gravel stop.
                 Manufactured from various metals (see chart
                  below) in 10’ lengths; 2” and 4” widths.
                 End-notched to provide piece-to-piece
                  interlocking.

                 Ready-to-assemble inside and outside corners
                  are available.
            Energy Efficiency:
                                   ®
                 ®
            LEED  and ENERGY STAR  compliant.

            Installation:

              1.   A wood nailer is required if 1” or greater of
                  insulation is used.
                                                                                   2” Gravel Stop Cover
              2.   This nailer should be attached to the wall in
                  accordance with ANSI/SPRI ES-1 3.9.

                                                     ®
              3.   Install in accordance with EXCEPTIONAL
                  Metals detail drawings #3100, #3520, and
                  #3530.

              4.   Any deviation from the requirements set forth in
                  detail drawings must be pre-approved, in writing,
                  by the EXCEPTIONAL Metals Technical
                  Department.

            Codes and Standards:
                  ANSI/SPRI ES-1 Compliant with 24-gauge
                            ®
                   Galvalume  cover.
                  FM Approved.
            Warranty:

            Duro-Last offers a wide range of warranty coverage for
            EXCEPTIONAL Metals products when used with the
            Duro-Last roofing system, including paint and finish.

            Technical Services:
                                                                                 4” Gravel Stop Cover
            Product samples, detail sheets, color chips, and color
            chart are available for your submittal package. For
            assistance with questions or submittals, contact your
            local representative or call EXCEPTIONAL Metals.           Material         Gauge           Finish
                                                                                                               ®
                                                                      Aluminum           .040        Mill or Kynar
                                                                    Stainless Steel    24-gauge          N/A
                                                                   Bonderized Steel    24-gauge          N/A
                                                                              ®
                                                                                                               ®
                                                                     Galvalume         24-gauge      Mill or Kynar
                                                                       Copper           16 oz.           Mill
                                                                                                    ®
            “Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. “LEED” is a trademark owned by the U.S. Green Building Council  and is used with
            permission.  “ENERGY STAR” is a registered mark owned by the U.S. Government.  ENERGY STAR is only valid in the United States. “Galvalume” is a registered mark owned by
            BIEC International Inc.                                                                          Revised 11/04/2015
   191   192   193   194   195   196   197   198   199   200   201