Page 15 - 2019 Perma-Synergy Full_Line Catalog

Solvent Stone & Concrete Systems

Product Group: Stone Seal™
3-200-12
Quart only Stone & Concrete Impregnator
Stone Seal is specially formulated to penetrate dimensional stone
surfaces, placing a protective barrier of hard synthetic resins within the
top layer of the stone. This impenetrable barrier protects mineral
surfaces, preventing staining and water spotting. Stone Seal allows stone
to breath while brightening and enhancing the natural colors, leaving the
surface clear and more slip resistant.

Product Group: Stronghold™
3-201-12
Quart only Solvent/Acrylic Impregnator/Sealer
Strong Hold concrete sealer/conditioner has been formulated to penetrate concrete
surfaces and place a protective, chemical resistant acrylic/urethane matrix within the
top layer of concrete surfaces that prevents staining and spotting from engine oil,
brake fluid, transmission fluid, hydraulic oils, grease, etc. The treated surface is left
clear, glossy, and easier to clean.
Product
Water- All-Seal™
Group:
based
3-571-04,05 Multi-Surface Sealer
New for 2018, Perma All-Seal™ is the "sealer for all seasons". This penetrating, fast-
drying, acrylic-urethane blended product can perform equally well on an amazing
array of surfaces, from unsealed wood, to vinyl sheet goods, to slate, ceramic,
terrazzo and concrete floors. Use a a stand-alone product or as a prep-sealer under
NEW Perma All-Coat.

Product Also new in 2018 is this high solids, high gloss,
Group: All-Coat™ fast-building finish that can be applied to
3-562-04,05 Multi-Surface Sealer virtually any hard surface flooring with
equally spectacular results. With hardness and slip-resistance superior to traditional floor finishes,
Perma All-Coat can be the one-product choice finish for professionals on a wide variety of surfaces:
sealed Wood, VCT, Terrazzo, and of course, Concrete.
Product Groups:
Deep Impact™ 2-156-04,05 | 2-111E-04,05 Prepare™
Deep Cleaner/Degreaser for Stone & Concrete Acid Etch for Stone & Concrete
Strong Hold concrete sealer/conditioner has been Prepare is a concentrated formulation containing
formulated to penetrate concrete surfaces and place Hydrochloric (Muriatic) Acid, detergents, and
a protective, chemical resistant acrylic/urethane surfactants for use in preparing concrete, terrazzo, and
matrix within the top layer of concrete surfaces that unglazed stone or ceramic tile flooring for coating with
prevents staining and spotting from engine oil, brake water or solvent-based sealers. Prepare's powerful
fluid, transmission fluid, hydraulic oils, grease, etc. chemical reaction dissolves ground in dust and dirt,
The treated surface is left clear, glossy, and easier to opening up the pores in smooth mineral surfaces and
clean. insuring proper adhesion characteristics between the
flooring and sealer.

Solvent Stone & Concrete Products - Page 1
0