Page 13 - 2019 Perma-Synergy Full_Line Catalog

Concrete Sealers & Finishes

Product Group:
3-556-04,05 Poly-Star 350™
350gram/Ltr Polyurethane Concrete Coat

Poly-Star 350 offers the performance advantages of rapid build, reasonable dry time, superior durability, and high gloss
found in Poly-Star 50, in a low VOC formulation. Poly-Star 350 is formulated for use on all interior concrete floors. Poly-
Star 350’s full body provides rapid film build that dries under normal conditions in approximately 7-9 hours to a hard,
glossy finish that provides excellent resistance to abrasion, wearing, and chemicals. This product complies with more
stringent 350 gram/liter VOC regulations.

Product Group:
3-555-04,05 Poly-Star 450™
450gram/Ltr Polyurethane Concrete Coat
Poly-Star 50 is a superior oil-modified urethane that is formulated for use as a finish
on all interior concrete surfaces. Easy to handle and with excellent leveling
characteristics, it dries at room temperature in approximately 4-6 hours under normal
drying conditions to a hard, glossy film, which exhibits excellent resistance to
abrasion, wearing, and chemicals. This product is Federal 450 grams/liter VOC
emissions law compliant.

Product
Group: All-Seal™
3-571-04,05 Multi-Surface Sealer
New for 2018, Perma All-Seal™ is the "sealer
for all seasons". This penetrating, fast-drying, acrylic-urethane blended product can
perform equally well on an amazing array of surfaces, from unsealed wood, to vinyl
sheet goods, to slate, ceramic, terrazzo and concrete floors. Use a a stand-alone
product or as a prep-sealer under NEW Perma All-Coat.

Product
Group: All-Coat™
3-562-04,05 Multi-Surface Sealer
Also new in 2018 is this high solids, high gloss, fast-building finish that can be applied
to virtually any hard surface flooring with equally spectacular results. With hardness
and slip-resistance superior to traditional floor finishes, Perma All-Coat can be the one-
product choice finish for professionals on a wide variety of surfaces: sealed Wood,
VCT, Terrazzo, and of course, Concrete.

Product Group: Easy Coat™ System
WDEP-05 HWFC-24
HWFC-24R FIAP-CAN Gym Finish Application Product Group
Lightning fast and inexpensive, the Easy Coat Finish Application System turns a time
consuming chore into a light maintenance task. Using a low tech, inexpensive
watering can to apply finish eliminates the issue of dirt and bacterial contamination
from applicators and waste because unused finish can be returned to the original
container.
Solvent Concrete Products - Page 1
0