Page 9 - 2019 Perma-Synergy Full_Line Catalog

Oil-Based Wood Gym Coatings

Product Group: Coast-To-Coast™
3-551-04,05
gal, pail High Gloss, VOC Compliant OMU Finish
Coast-to-Coast offers the performance advantages of rapid build,
reasonable dry time, superior durability and high gloss that are found in
Perma’s traditional polyurethane gym finishes, in a low VOC formulation.
Coast-to-Coast is formulated for use on all interior residential,
institutional and commercial wood floors.

Coast-to-Coast’s full body provides rapid film build and dries to a hard, glossy finish that provides excellent resistance to
abrasion, wearing, and chemicals. Coast-to-Coast complies the with Northeast Ozone Transport Commission’s (OTC) and
California’s more stringent 350 gram/liter VOC regulations.

Product Group: Center Court™
3-550-04,05
gal, pail Static Dissipating Gloss Floor Finish
Center Court is a premium polyurethane gymnasium finish, formulated from a
combination of pure oil-modified polyurethane resin, stoddard solvents, and drying
and leveling agents, with no fillers or bodied vegetable additives. For use as a finish
on all interior wood surfaces Center Court is easy-to-handle and exhibits superior
leveling characteristics.

Under normal conditions, Center Court dries at room temperature in approximately 5-7 hours to a hard, glossy film, which
provides excellent resistance to abrasion, wearing, and chemicals. It's 50% pure polyurethane resin content provides rapid
build and high gloss. Ideal for the contractor who desires outstanding results with fewer coats. Center Court complies with
current Federal VOC regulations.

Product Group: Easy Coat™ System
WDEP-05 HWFC-24
HWFC-24R FIAP-CAN Gym Finish Application Product Group
Lightning fast and inexpensive, the Easy Coat Finish Application System turns a time
consuming chore into a light maintenance task. Using a low tech, inexpensive
watering can to apply finish eliminates the issue of dirt and bacterial contamination
from applicators and waste because unused finish can be returned to the original
container.
T / Drag Bar applicators are available in both heavy and light weight versions for applying solvent and water based finishes.
After use with water based finishes, the applicator can is simply rinsed out with clean water. With solvent based finishes
the can may be easily cleaned by wiping it out with rags. In the event of a mistake, finishes don't stick to the high impact
plastic and are easily peeled from the can. Applicator refills are available in both Woven Flock for solvent based systems
and Nylofoam for water based finishes.

OMU Wood Floor Products - Page 2
0