Page 12 - 2019 Perma-Synergy Full_Line Catalog

Concrete Sealers & Finishes

Product Group:
3-22-04,05 Perma Seal II™
gal, pail Clear Water-Based 2-Part Epoxy
This high performance, water-based epoxy/acrylate finish provides
outstanding durability, abrasion resistance, and high gloss retention
without the toxicity and disposal considerations associated with some
solvent systems. Perma Seal II also displays superb resistance to a wide
variety of chemicals and solvents commonly found in

industrial and commercial environments. When cured, Perma Seal II exhibits characteristics superior to solvent-
based urethanes and rivals those of solvent-based epoxy coatings. Perma Seal II produces superior results
when used on a broad range of concrete, ceramic and even vinyl composition tile surfaces.

Product Group:
3-22G-04,05 Gray Perma Seal II™
gal, pail Gray Water-Based 2-Part Epoxy
Employing the exact same characteristics as our original Perma Seal II, this pigmented
version provides outstanding durability, abrasion resistance and gloss. However, for
applications were the ultimate chemical and solvent resistance is required, place a
coat of Clear Perma Seal II over a base coat of Gray Perma Seal II. For other colors,
use a base of Titanium (with 4 colors available) and a clear, protective coat of Perma
Seal II.

Product Group:
3-21-04,05 Rock On™
gal, pail Urethane/Acrylic Clear Sealer/Finish
Combining the best quality acrylic polymers and fortifying them with urethane has
produced a semi-permanent, water based coating which can be used with excellent
results on concrete, stone, brick, and other hard surfaces. Rock On produces a hard,
durable film which performs well in light to medium traffic situations. It is easily
applied with lamb's wool or squeegee type applicators and cleans up with soap and
water.

Product Group:
1-36_-04,05 Titanium™
gal, pail Tinted Urethane/Acrylic Sealer/Finish
Combining the best quality acrylic polymers and fortifying them with urethane has
produced a semi-permanent, glossy, gray pigmented, water-based finish which can
be used with excellent results on concrete, stone, brick, and other hard surfaces.
Titanium can be effectively used in applications formerly delegated to solvent based
finish systems, without the sometimes difficult application and preparation
procedures or solvent fumes. Available in Light Gray, Medium Gray, Desert Sand.

Water-base Concrete Products - Page 1