Page 125 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 125

Check for continuity between Breakout Box cavity 8 (gray) and ground at Breakout Box cavity 12 (gray): with left turn signal switch depressed, wiggle harness Check for continuity between Breakout Box cavity 7 (gray) and ground at Breakout Box cavity 12 (gray): with right turn signal switch depressed, wiggle har- ness between TSM/TSSM and right handlebar








                                                                                          NO         between TSM/TSSM and left handlebar switches.  Is continuity present at any time?  NO  System OK.  Review turn signal cancellation  function with customer. See   AUTOMATIC CANCELLATION- under 3.4 TSM/TSSM TURN  SIGNAL FUNCTIONS.
                                                                                              Turn ignition switch OFF.  switches.



                                                                 Check for voltage between Breakout Box cavity 8 (gray) and ground at Breakout Box cavity 12 (gray): with left turn signal switch  NOT depressed, wiggle harness between TSM/TSSM and left handlebar switches while monitoring Check for voltage between Breakout Box cavity 7 (gray) and ground at Breakout Box cavity 12 (gray): with right turn signal switch  NOT depressed, wiggle harness between TSM/TSSM and right handlebar switches while monitoring  ●  ●  ●  YES  Locate and repair   intermittent short to   ground.









                                                             NO        for voltage fluctuations or turn signal activation.  for voltage fluctuations or turn signal activation. Are voltage fluctuations present?  YES  Locate and repair   intermittent short to   5  voltage.






                        Continued from Turn Signal Error 1A (Part 1 of 2). Check for voltage between Breakout Box cavity 8 (gray) and ground at Breakout Box cavity 12 (gray): with left turn signal switch depressed, wiggle harness between TSM/TSSM and left handlebar switches while monitoring for voltage fluctuations or changes in turn  Check for voltage between Breakout Box cavity 7 (gray) and ground at Breakout Box cavity 12 (gray): with right turn signal switch depressed, wiggle harness TSM/TSSM and right handlebar switches while monitoring for voltage fluctuations or changes in  Are voltage fluctuations present?  ●  ●
             Turn Signal Error 1A (Part 2 of 2)






                CANCEL ERRATICALLY  signal flash pattern.  between   turn signal flash pattern.  YES  Locate and repair   intermittent open.              2006 Softail: TSM & TSSM








         HOME              ●    4    ●                             5                                                                                    3-50
   120   121   122   123   124   125   126   127   128   129   130