Page 126 - 2006 HARLEY FLSTCI SERVICE MANUAL

3-51

Connector [30] 6792
NO mated fully? NO Mate connector. 2006 Softail: TSM & TSSM

WILL NOT FLASH, 4-WAY FLASHERS INOPERABLE: DTC B1121, B1122, B1141

YES Place red meter lead at cavity 1 (gray) and black meter lead at cavity 12 (gray) of Breakout Box. Is battery voltage present? NO STOP Go to Turn Signal Error 2C.

Activate 4-way flashers. Do any lamps illuminate? Go to Turn Signal 4

NO YES STOP Error 2B. YES Move red meter lead to Breakout Box cavity 2. Battery voltage present? NO Check for voltage at ignition fuse. Battery voltage present on both terminals? NO STOP For carbureted models, go to 4.11 NO SPARK/NO ICM POWER. For EFI models go to 5.11 NO ECM POWER.

Turn ignition switch ON. Are turn signal lamps on continuously? NO Replace TSM/TSSM. Learn password and perform setup. 6791 YES STOP Go to Turn Signal Error 2D. 6793

Turn Signal Error 2A YES Check for voltage on Breakout Box cavity 5 (gray) (left turn signals) or cavity 6 (gray) (right turn signals) with TSM/TSSM disconnected from Break- out Box. Is battery voltage present? YES Locate and repair short to voltage. 6790 YES Locate and repair open on gray wire between ignition fuse and TSM/TSSM.

HOME 4