Page 1254 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1254
7.4 7-5
Figure 7-4. Secondary Clutch Actuator Components
2006 FLSTFSE 2 : Transmission
3
2
Piston Primary cup Spring
SECONDARY CLUTCH ACTUATOR
1
8880
1. 2. 3.
7.3 CLUTCH Wear
Remove the clutch release cover. See 1WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury. safety glasses when working with compressed air. Never use your hand to check for air leaks or to determine air If the bleeder valve was removed, reinstall. Support on a wooden block and apply low pressure compressed air to clutch fluid line hole to remove piston from cover bore. See Figure 7-4. If necessary, wiggle piston from actuator bore to completely remove. Remove the spring. Discard spring and piston assembly. CAUTION Avoid leakage. Prevent damage to piston or piston
REBUILD RELEASE COVER. flow rates. (00061a) Remove piston. a. b. service kit lubricant. Install new spring. cup from rolling over.
HOME 1. 2. 3. 4. (00328a) 5. 6. 7.

