Page 357 - 2006 HARLEY FLSTCI SERVICE MANUAL

f2198x8x f2201x8x
Figure 6-27. Raise Locking Bar and Barrel Holder
Figure 6-28. Position Contact in Crimper Figure 6-29. Crimp Terminal Onto Wire
Barrel Holder

Locking Bar

f2199x8x

bottom tab with index finger. See Figure 6-27. Raise locking bar and barrel holder by pushing up on With the crimp tails facing upward, insert contact through locking bar into front hole in barrel holder (20-22 gauge Release locking bar to lock position of contact. When correctly positioned, the locking bar fits snugly in the space at the front of the core crimp tails and the closed side of the terminal rests on the outer nest of the crimp Insert wires between crimp tails until ends make contact with locking bar. Verify that wire is positioned so that wide pair of crimp tails squeeze bare wire strands, while the

HOME 5. 6. wire). 7. tool. See Figure 6-28. 8. 9. 10. 11. 6-24