Page 358 - 2006 HARLEY FLSTCI SERVICE MANUAL

6.8 6-25

4 2006 Softail: Wiring

Figure 6-30. ECM Connector Figure 6-31. Connector Tabs

3 3 1

Conduit Cable strap Tabs Clear plastic cover 2 Connector tabs Retainer tab

s0542x8x 2 1 1. 2. 3. 4. s0543x8x 1. 2.

PACKARD ECM CONNECTOR

nector and remove clear plastic cover (4). See Figure 6-30. Depress tabs (3) on the sides of con- See Figure 6-31. Pry three connector tabs (1) to sepa- Lift retainer tab (2). to release terminal. Pull on wire from back side of connector to expose wire NOTE A series of Packard Electrical Terminal Crimp Tools are avail- able to install Packard socket terminals on wires. If new termi- nals must be installed, see CRIMPING INSTRUCTIONS Push wire into correct hole until terminal is seated. NOTE In next step be sure wires are not pinched while mating con- See Figure 6-30. Mate connector halves mak

DISASSEMBLY Remove cable strap (2). rate connector halves. terminal. ASSEMBLY inside connector halves.

HOME 1. 2. 3. 4. 5. below. 1. nector halves. 2. 3. 4.