Page 726 - 2006 HARLEY FLSTCI SERVICE MANUAL

2.23 2-77 2006 Softail: Chassis
will free damper tube (15) and fork tube (8) so that they

can be removed from slider. The upper bushing (16) is a slight interference fit in slider (12). The upper bushing together with spacer (17) and oil seal (18) are removed by lightly hitting the upper bushing with the lower bushing (19) as the fork tube is pulled free of the fork slider in a quick continuous stroke. Continue this slide hammer action until the components are freed. Push the damper tube (15) and damper tube spring (20) free of slider tube (8) by inserting a small diameter rod through the opening in the bottom of tube. Remove lower stop (21) from the lower end of damper Damper tube ring (22) can now be removed from the grooves a

FRONT FORKS: ALL BUT FLSTSC/FXSTS

7. 8. 9. tube (15). 10. 2.5 1. 2. 3. 4. 5. 6. 7.

2.24 SPRINGER FORK: or The FLSTC/FLSTF/FLSTN and FLST On FXST/FXSTB only, remove dust Compress retaining ring (11) and

There are three varieties of hydraulic forks: All FLSTC, FLSTF , FLSTN and FLST Softail models use the type shown in Figure 2-95. All FXST and FXSTB Softail models use the type shown FXSTD Softail models use the type shown in Figure 2- Use the following information to service the models listed above. For other vehicles, see Remove front wheel and brake caliper. See 2.4 FRONT WHEEL: ALL BUT FLSTSC/FXSTS/FXSTD FRONT WHEEL: FXSTD Remove front fender. See 2.31 FRONT FENDER: ALL BUT FLSTSC/FXSTS. Remove the slider tube cap (1), spacer (2) and oil seal (3) from the top of one fork side. Loosen the pinch bolt (4) and pull the fork side fro

GENERAL in Figure 2-96. 97. FLSTSC/FXSTS. REMOVAL brackets. DISASSEMBLY Figure 2-95. See cover (23). See slider (12). impact wrench.

HOME ● ● ● 1. 2. 3. 4. 5. See 1. 2. 3. 4. 5. 6.

2