Page 722 - 2006 HARLEY FLSTCI SERVICE MANUAL

2-73

1 2 2006 Softail: Chassis

2 Figure 2-90. Crossover O-rings and Inside Housing 1 3 Figure 2-91. Wipers and Square Seals
Crossover O-rings (2) Wooden toothpick

1 Pistons (2) Wiper Square seal

7394 1. 2. d0556x2x 1. 2. 3.

3

11WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury. Wear safety glasses when working with compressed air. Never use your hand to check for air leaks or to deter- Place BRAKE CALIPER PISTON REMOVER (3) (Part No. HD-43293-A) between caliper housings. Insert two bridge bolts (2) (12 pt/10 mm) and tighten If the bleeder valve was removed, loosely reinstall or place a gloved finger over the bleeder valve hole on Apply low pressure compressed air (1) to banjo bolt hole to remove pistons from caliper bores. Remove bridge bolts and remove tool. See Figure 2-90. Remove and discard both

mine air flow rates. (00061a) See Figure 2-89. Remove pistons. securely. the outside caliper housing. rings (1) from inside caliper housing. completely remove. Discard all removed parts. 1 Low pressure air hose Bridge bolt (12 pt/10 mm) Brake caliper piston remover (Part No. HD-43293-A)

HOME 4. a. b. c. d. e. 5. 6. 7. d0555x2x 1. 2. 3.