Page 717 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 717

1                                                           2




                                           2          Figure 2-83. Crossover O-rings and   Inside Housing  1  3  Figure 2-84. Wipers and Square Seals
                                                Crossover O-rings (2)                                 Wooden toothpick






                  1                               Pistons (2)                                           Wiper  Square seal

               7394                             1.  2.           d0556x2x                             1.  2.  3.



                      Wear









                11WARNING 1WARNING Compressed air can pierce the skin and flying debris from compressed air could cause serious eye injury.  safety glasses when working with compressed air. Never use your hand to check for air leaks or to determine air  See Figure 2-82. Remove pistons. Place BRAKE CALIPER PISTON REMOVER (3) (Part No. HD-43293-A) between caliper housings.  Insert three bridge bolts (2) (12 pt/10 mm) and If the bleeder valve was removed, loosely reinstall or place a gloved finger over the bleeder valve hole on the outside caliper housing. Apply low pressure compressed air (1) to banjo bolt hole to remove pistons from caliper bores. Remove bridge bolts







                            flow rates. (00061a)  tighten securely.      completely remove.      Discard all removed parts.  3              Low pressure air hose Bridge bolt (12 pt/10 mm)  (Part No. HD-43293-A)  2006 Softail: Chassis





          HOME                  4.  a.   b.    c.      d.    e.   5.  6.                    7.          d0567x2x                           1.  2.  3.            2-68
   712   713   714   715   716   717   718   719   720   721   722