Page 758 - 2006 HARLEY FLSTCI SERVICE MANUAL

Figure 2-133. FLSTSC Fender Bearings NOTE See Figure 2-133. Parts 1-5 are shown for reference only. They are normally removed as the wheel is pulled from the 3 2 Figure 2-134. FLSTSC Spacer Alignment Install spacers to axle with step NOTE Install front wheel and brake caliper. See 2.6 FRONT 2-109 2006 Softail: Chassis

6 The thick spacer (3) goes on the left (brake disc) side.

4 1

5 2 Spherical bearing Figure 2-134. towards the front wheel.
Hub cap O-ring Axle
3 Hub cap seal Right spacer Nylon insert Thin spacer Thick spacer WHEEL: FLSTSC.
s0343x2x 1 1. 2. 3. 4. 5. 6. vehicle. s0342x2x 1. 2. 3. See 6. 7.

Position metal plate and suitable tool that makes contact
with outer race of bearing and inner race of fender bore

under inboard side of fender bore. Install new spherical bearing (outboard to inboard) with first suitable tool and arbor press. Bearing is properly seated when outer race bottoms out on second suitable tool (is flush with inboard side of fender bore). Repeat all steps for the other spherical bearing. INSTALLATION 11WARNING 1WARNING Do not use aftermarket parts and custom made front forks which can adversely affect performance and han- dling. Removing or altering factory installed parts can adversely affect performance and could result in death or Alter the fender brackets to lower the fender. Doing this could allow the front wheel to bind on th

HOME 3. 4. 5. serious injury. (00001a) DO NOT: ● ● ● ity. 1. b. 2. 3. 4. 5.