Page 766 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 766

2-117

                                    5






                             3                                                                                                                                   2006 Softail: Chassis

                                        4                        Figure 2-142. Rear Fender
                                                    License plate bracket Screw and washer (2)

                   1

                                        2                Bracket (2)  Tail lamp harness  Wiring slot



               7614                                 1.  2. Apply LOCTITE  THREADLOCKER  3.  4.  5.  SIGNALS/RUN-
























              ASSEMBLY See  Figure 2-142.  Place tail lamp harness (4) behind bracket (3) if removed. Harness runs along same side as  wiring slot (5). Secure license plate bracket (1) using two screws and washers (2). Tighten to 144-180 in-lbs (16.3-20.3 Nm).  INSTALLATION See Figure 2-141. Place fender over rear tire and inside frame tubes. Verify wiring for tail lamp harness and ECM connectors are not pinned under fender. Loosely install both fender mounting brackets (1) using two nuts (3) on each side. When finished, final tighten to 20-25 ft-lbs (27.1-33.9 Nm).  Figure 2-140.   See  243 (blue) to screws (3). Install screws and spacers (4) to attach both fender





          HOME     1.      2.           1.     2.     3.          4.    5.   6.   7.  8.                9.               10.
   761   762   763   764   765   766   767   768   769   770   771