Page 931 - 2006 HARLEY FLSTCI SERVICE MANUAL

4.4 2

1 Figure 4-2. Throttle Cables Accelerator pump nozzle Screw Main jet Needle jet holder Needle jet Fuel inlet valve with clip Enrichener valve Spring Cable sealing cap Starter cap Cable guide

Throttle control cable Idle control cable 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54.

1. 2. s0090x1x Legend for Figure 4-3. Carburetor

See Figure 4-2. Disconnect the throttle cables (1, 2) from
See Figure 4-3. Remove vacuum hose from the carbure-
tor. Pull carburetor free of seal ring (13) and manifold (9).
and detach MAP sensor connector from wiring harness.
See 8.7 MANIFOLD ABSOLUTE PRESSURE SENSOR
remove the screws (10) that hold the manifold in place
Remove enrichener cable (52, 53, and 54), enrichener
If the manifold or manifold seals need to be removed,
Remove the air cleaner cover and backplate. See 4.8
Turn the fuel supply valve OFF . Disconnect fuel line from
Detach enrichener knob from bracket above horn. See
Collar Collar E-clip Washer Cotter pins (2) Washer Lever Washer Cotter pins (2) Slow jet Pin Float Boot Rod O-ring Float bowl Diaphragm Spring Pump housing Lockwashers (3) Screws (3) O-ring
22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43.

CARBURETOR AIR CLEANER: CARBURETED. 1WARNING 1WARNING Stop the engine when refueling or servicing the fuel sys- tem. Do not smoke or allow open flame or sparks near gasoline. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. carburetor. 1.24 THROTTLE CABLES. the carburetor. valve (50) and spring (51). Screw, top (3) Top Collar Spring Spring seat Jet needle Vacuum piston Flange Manifold Screw (4) @ 8-12 ft-lbs (10.9- 16.3 Nm) Flange Seal, intake manifold Seal ring Screw (idle speed adjust) Spring Screw (throttle cable bracket) Bracket, throttle cable Screw (throttle cable bracket

HOME REMOVAL 1. (00002a) 2. 3. 4. 5. 6. 7. (MAP). 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 4-6