Page 988 - 2006 HARLEY FLSTCI SERVICE MANUAL

6-5

2006 Softail: Drive

Figure 6-7. Oil Seal

10716

With the lip garter spring side

1WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause Inspect the bearing bore to verify that it is clean and smooth. Install retaining ring in groove on pulley side of primary chaincase. Verify that the ring is fully seated in Place primary chaincase in arbor press with the clutch CAUTION Support the retaining ring area on pulley side while pressing bearing into bore. The force needed to press bearing into position may force an unsupported primary Support the retaining ring case area on the pulley side of Applying

HOME serious eye injury. (00312a) the groove. side up. chain case to become damaged. the primary chaincase. the installed retaining ring. by the words “OIL SIDE”. Install mainshaft oil seal: a. oil. See b. grease or clean engine oil.

6. 7. 8. 9. 10. ● ● ● 11. 12.