Page 992 - 2006 HARLEY FLSTCI SERVICE MANUAL

6-9

45˚ 50˚ 3
2006 Softail: Drive

Locking Tool Figure 6-14. Installing Compensating Sprocket Nut Sprocket shaft nut Scribe line on nut and cover Figure 6-15. Compensating Sprocket Nut Final Tightening Locking Tool Figure 6-16. Installing Clutch Hub Mainshaft Nut

1 2 Sprocket cover
7857a d0353b. 1. 2. 3. 7858a

NOTE Clutch hub mainshaft nut has left handed threads. Turn coun- Clean and prime threads of nut. Apply two drops of LOC- TITE THREADLOCKER 262 (red) to the threads of the clutch hub mainshaft nut. Start nut onto mainshaft and NOTE See Figure 6-14. When installing the compensating sprocket nut the PRIMARY DRIVE LOCKING TOOL (Part No. HD- 41214) must be placed between upper strand of primary Tighten compensating sprocket nut to 75 ft-lbs (101.7 Nm). Remove primary drive locking tool. See Figure 6-15. Scribe a line (3) on the sprocket shaft nut (1). Continue the line on the sprocket cover (2) as Tighten the sprocket shaft nut an additional 45˚ to 50˚

terclockwise to install. tighten hand tight. chain and clutch hub sprocket. shown. (50˚ MAXIMUM). compensating sprocket. ward.

HOME 5. 6. 7. 8. 9. 10.