Page 67 - ZEST-Binder1 FLIP pdf

®
ben
CHALKBOARD PAINT 308

Features General Descriptions
®
 Goes on easily and is  Dries to a decorative finish ben Chalkboard Paint (308) is acrylic-based, tintable
washable that is extremely durable topcoat and turns virtually any interior surface into a
 Resists spattering during  Soap and water clean-up chalkboard.
application  Dries quickly
 Zero VOC, Low odor  Available in any color
 Qualifies for LEED v4 credit

Recommended For Limitations
For interior use on previously painted surfaces. Use wherever a  Do not apply when air and surface temperatures are
chalkboard finish is desired. For best results, use traditional, non- below 50 °F (10 °C)
liquid chalk, in lighter colors.
Product Information
Colors — Standard: Technical Data Pastel Base
N/A
Vehicle Type 100% Acrylic
— Tint Bases: Pigment Type Titanium Dioxide
®
®
Benjamin Moore Gennex Bases 1X, 2X, 3X, & 4X Volume Solids 40%
Coverage per quart at
— Special Colors: Recommended Film Thickness 100 – 110 Sq. Ft.
N/A Recommended Film – Wet 3.8 mils
Thickness – Dry 1.5 mils
Certifications & Qualifications: Depending on surface texture and porosity. Be sure to
VOC compliant in all regulated areas estimate the right amount of paint for the job. This will
ensure color uniformity and minimize the disposal of excess
paint.
Zero VOC
Qualifies for LEED v4 Credit Dry Time @ 77 °F – To Touch 2 Hours
®
(25 °C) @ 50% RH – To Recoat 4 Hours
Qualifies for CHPS low emitting credit
(Collaborative for High Performance Schools) Allow painted area to cure for 3 days before using. Painted
CDPH v1 Emission Certified surfaces can be washed after two weeks. High humidity and
cool temperatures will result in longer dry, recoat and service
Class A (0-25) over non-combustible surfaces when tested in accordance times.
with ASTM E-84
Dries By Evaporation, Coalescence
Viscosity 95 ± 2 KU
Flash Point None
Technical Assistance: Gloss / Sheen Eggshell (5 – 10 @ 85°)
®
Available through your local authorized independent Benjamin Moore
retailer. For the location of the retailer nearest you, call 1-866-708-9180, Surface Temperature at – Min. 50 °F
see www.benjaminmoore.com, or consult your local Yellow Pages. Application – Max. 90 °F
Thin With Clean Water
Clean Up Thinner Clean Water
Weight Per Gallon 10.5 lbs
– Min. 40 °F
Storage Temperature
– Max. 90 °F
Volatile Organic Compounds (VOC)

0g/L

Zero VOC Post tint (any base and any color)

◊ Reported values are for Pastel Base. Contact Benjamin Moore for
values of other bases or colors.

Benjamin Moore & Co., 101 Paragon Drive, Montvale, NJ 07645 Tel: (201) 573-9600 Fax: (201) 573-9046 www.benjaminmoore.com M72 308 US 053118