Page 71 - ZEST-Binder1 FLIP pdf

®
NOTABLE
DRY ERASE PAINT

0500

Features General Description
 Silicone Epoxy  Applicable to most Notable is a two-component dry erase paint. Notable
®
®
 <150 g/L VOC surfaces transforms virtually any surface into a writeable and erasable
 Ready to use 7 days after  10 year warranty surface. This is a two component product that requires all
of the proper 0500 part “A” component be mixed with all
application
of the proper 0500 part “B” component.

Recommended For Limitations
For professional use in interior commercial or residential spaces  Do not paint when temperature of air and surface is below
such as office buildings, classrooms and homes. 45 °F (7.2 °C)
 Do not mix with other paints, colorants, stains or glazes
 Do not mix partial kits
Product Information
Colors — Standard: Technical Data White
White (01), Clear (00) Vehicle Type Silicone Epoxy Hybrid

Available in 50, 100 and 200 sq. ft. kit sizes Pigment Type Titanium Dioxide
Volume Solids 85.8%
— Tint Bases: Coverage per Gallon kit at
N/A Recommended Film Thickness 200 Sq. Ft.
Recommended Film – Wet 4 mils
— Special Colors: Thickness – Dry 3.5 mils
N/A
Depending on surface texture and porosity. Be sure to estimate
the right amount of paint for the job. This will ensure color
Certifications & Qualifications: uniformity and minimize the disposal of excess paint.
The products supported by this data sheet – To Touch 4 Hour
contain a maximum of 150 grams per liter Dry Time @ 77 °F Refer to Application
VOC / VOS (1.25 lbs. /gal.) excluding water (25 °C) @ 50% RH – To Recoat on page 2
& exempt solvents. VOC REGION COMPLIANT – Full Cure 7 Days
FEDERAL YES High humidity and cool temperatures will result in longer
®
Qualifies for LEED v4 Credit OTC YES dry, recoat and service times.
Qualifies for CHPS low emitting credit OTCII YES Dries By Chemical Cure
(Collaborative for High Performance Schools) CARB YES
CDPH v1 Emission Certified CARB07 YES Viscosity White (Mixed) <55 KU
UTAH YES Flash Point 239 °F
AZMC YES Dry Heat Resistance 300 °F
SCAQMD NO Gloss / Sheen High Gloss (75+ @ 60°)
Surface Temperature at – Min. 45 °F
Technical Assistance Application – Max 90 °F
Available through your local authorized independent Benjamin Moore retailer.

For the location of the retailer nearest you, call 1-866-708-9180 or visit Thin With Do Not Thin
www.benjaminmoore.com Clean Up Thinner Mineral Spirits

Weight Per Gallon 11.6 lbs.
Mixed Ratio (by volume) Premeasured
Induction time @ 77°F Not Required
Pot Life @ 77°F 4 Hours
– Min. 40 °F
Storage Temperature
– Max 90 °F
Volatile Organic Compounds (VOC)

121 Grams/Liter 1.0 Lbs./Gallon

◊ Reported values are for White. Contact Benjamin Moore for
values of other bases or colors

Benjamin Moore & Co., 101 Paragon Drive, Montvale, NJ 07645 Tel: (201) 573-9600 Fax: (201) 573-9046 www.benjaminmoore.com M72 500 US 091118