Page 240 - TORO PRODUCT CATALOGUE NOV_2019

R Valves Overview
Century Century 700 Model Plus Plus Series
Series Scrubber (UltraFlow)
200B Series
204/205 Series
2500 Series
2400 Series
IV25 Series
Mini Control Valves
Page Number
225 226-227 228 229 230 231 232 233 234
Residential X XXXXX
Commercial X X X X X X
Manual X X X X X X X X
Electric X X X X X X X X X
Hydraulic X (with X (with HCV Kit) HCV Kit)
20mmX X
25mm X X X X X X X
40mm X X X X
50mm X X X X
80mm X X
Angle X X X
Globe X X X X X X X X X
ThreadedFBSP X X X X X X X X
Slip X
Manual Flow Control
X X X X optional optional optional X
InternalBleed X X X X X X X
Body Construction
Glass filled nylon
Glass filled nylon
Glass filled nylon
PVC
PVC
PVC
PVC
Glass filled nylon
Heavy Duty Engineering Plastic
Pressure Range kPa*
70-1500 70-1500 70-1034 140-1034 70-1034 70-1034 70-1034 70-1250 20-1400
ExternalBleed X X X X X X X
DCLS-P compatible
XXXX XXX
* Reduce maximum pressure rating to 820 kPa if DCLS-P coil fitted.
When installing valves, please ensure the following:
• PTFE thread tape is used to seal all threaded fittings
• The valves are installed in position such that air can be evacuated from the bonnet, i.e. never install a valve upside down or on an angle as this could entrap air and possibly cause the valve to chatter and prevent valve closure
• In turf/landscape situations the valves are installed below ground in valve boxes for aesthetics and for easy valve adjustment and maintenance
• Loop 30 cm of extra cable inside valve box for wire contraction/expansion
• Use waterproof wire connectors
• Allow a valve box of sufficient size to provide access to all valves
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au
Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009.
Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
224
Features Inlet/Outlet Configuration Size Operation Application