Page 72 - pace maker 359371-001_LATITUDE_Patient_Manual e-magazine

Interrupted Electrical Power
English The Communicator has internal memory that
stores your interrogation and other information in
case the electrical power is interrupted or the AC
adapter is unplugged. The LATITUDE indicator will
transition back to green once power is restored to the
Communicator.

Checking the Communicator Can
Connect to the LATITUDE System

Complete the following steps to check that the
Communicator can connect to the LATITUDE
system. You should do this if you have moved the
Communicator or if there has been a change in your
connection method.

1. Check that the Communicator is plugged in and
the LATITUDE indicator is green.

2. Press and hold the Status button on the back
of the Communicator for more than 3 seconds.
The Sending Waves flash green in sequence
and repeat while the Communicator attempts to
connect to the LATITUDE system.
If both Collecting and Sending Waves light, you
did not press the Status button long enough.
Pressing the Status button for less than 3 seconds
displays the status of the last interrogation and
the status of the last attempt to connect to the
LATITUDE system.

3. Watch the front of the Communicator. The
Sending Waves should flash green in sequence

68 LATITUDE Communicator Patient Manual
®