Page 293 - B6118-AEW-XX-XX-PP-A-0001_(P19)_Contractors Manual
P. 293
CONSTRUCT
All redecoration to works noted ‘black’ to be Preparation
undertaken using Dulux 00 NN 07/000 black, 1) Degraded or weathered surface wood: take
gloss finish paint. All building redecoration must back to provide suitable substrate.
be spray applied over large areas and brush 2) Degraded substrate wood: repair with sound
applied for smaller complex items. material of same species.
3) Exposed resinous areas and knots: apply two
All works to be carried out as manufacturers coats of knotting.
recommendations. 4) Apply 2No coats Sikkens Cetol HS colour, ref:
RAL RAL9004.
Other redecoration around the site will be
completed in the same technical manner but in External cranked booth bollards
a black finish to the following areas (as indicated
on the site specific drawings): Preparation
1) Defective paintwork: remove to leave a firm
- Corral gates where agreed with designer or edge and clean bright metal.
McDonald’s PM. 2) Sound paintwork: provide key for subsequent
coats.
- Any existing railings or handrails that may be 3) Corrosion and loose scale: take back to bare
retained. metal.
4) Residual rust: treat with a proprietary removal
- Any existing lampposts which already have a solution.
paint finish (ie not galv).
Bare metal: apply primer as soon as possible.
External items (timber previously stained) Remaining areas: degrease.
1) Undercoat in Dulux brilliant white.
2) Brushed 2No overcoat in Dulux brilliant white
(60% gloss).
C1.4 Redecoration 2.0 09 February 2017
