Page 375 - B6118-AEW-XX-XX-PP-A-0001_(P19)_Contractors Manual
P. 375
CONSTRUCT
C3.10 Crew Lockers
Where new storage lockers are required, these All lockers must be installed on top of a 100-
should be procured by the principal contractor. 150mm high (height to match existing skirting)
plinth. Plinth to be constructed from suitable
The lockers are available in a range of formats softwood frame with outer layer of 12mm
and the exact order should be agreed with the plywood. The top of the plinth can remain
project manager. exposed plywood, however all visible sides must
be finished to match the existing skirting. Plinth
Lockers supplied by Helmsman are availabe to be exactly sized (including depth of finishes)
in banks of 4 and banks of 10 wallet lockers as to match footprint of the new lockers.
standard. Both are availabe with charging/
non-charging facilities. All lockers to be mechanically fixed to plinth
and rear wall at head of lockers to prevent
Display World also supply a modular system for overturning.
lockers/ storage/ crew recycling and kitchen in
a cupboard units.
C3.10 Crew Lockers 3.0 24 May 2022
