Page 51 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

2.9.6 Drivers Station/ GPS Power and Data Power for the GPS charging unit is via a 13AMP
The following power and data sockets are standard mains lead into a switched socket
required to be provided in the location of the on the bottom of the cabinet. The charging
drivers routine station at the height of 1050mm cabinet should be positioned close to the
AFFL to centre line of socket: drivers station or in the managers office as
• 1x Double Gang 13AMP red power socket agreed with franchisee (Project Manager).
• 1x Double Gang CAT-5E data socket,
destination to office comms cabinet
• 1x Single Gang CAT-5E telecoms socket

A GPS charging cabinet is required to be
installed as part of the initiative for drivers. The
cabinet dimensions are 211mm depth, 483mm
width and 850mm height (without wheels or
top handle installed). Should the cabinet be
provided with wheels the height would be
increased by 50mm and the handle increases
the cabinet height by a further 100mm.

All power, data and phone sockets
must be fitted within the cut out
space within the monitor wall bracket.

The maximum unloaded weight of a 10 bay
unit is 10kg whereas a 30 bay unit is 13kg.

2.9.6 Drivers Station / GPS Power and Data 3 September 2018