Page 50 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

2.9.5 ‘Make line’ and Slap Table Monitor Shrouds
Where the slap table/make line backs onto a Be aware that:
wall, the three wall mounted monitors must be a) the makeline monitor should face towards
shrouded by black monitor shrouds. Additional the counter
monitors may also be required - refer to drawings. b) the monitor at the makeline - slap table
• The surrounds require installation by the main junction should face away from the makeline
contractor. The monitors, brackets, small c) the monitor near the front of the slap table
power and data points must be installed in should face towards the makeline
the usual manner, concealed by the shroud
• Sockets, data points, monitor brackets and Where the slap table/make line doesn’t back
the black shroud should be fitted by the onto a wall, i.e. a sneeze screen, the monitors
shopfitter prior to installation of screens by should be pole mounted from the ceiling.
DPG IT team
• The tiles inside the shroud should be covered Refer to drawings for details of other screens
by BLACK vinyl by the sign contractor. (shoulder surf, etc)
• ALL sockets and data points inside the
shroud should be BLACK
• There are also angled front faced shrouds,
so angled monitors sit comfortably
• The boxes will have two sets of fixing holes to
ensure left and right-handed mounting, so
there is no need to order anything bespoke

2.9.5 ‘Make line’ and Slap Table Monitor Shrouds 30 May 2018