Page 16 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual
P. 16
D R A F T
1.5.4 Non-internally Illuminated Fascia Signs
Where a planning consent requires an
alternative method of signage illumination other
than internally illuminated individual letters, then
one of the following specifications should be
used, as appropriate to the particular consent
requirements:
Non-Internally Illuminated Tile logo and letterset
To the face of the fascia panel the built-up tile
logo, letterset and strap line must be applied
To the face of the fascia panel the built-up tile with 30mm returns all round including the strap
logo, letterset and strap line must be applied line. Constructed from aluminium, white powder
with 65mm returns all round (except the strap coated to RAL 9010, both inside and out, with
line which has 30mm returns) constructed from 5mm 069 translucent white acrylic faces. Letter
aluminium, white powder coated to RAL 9010, backs to be white aluminium.
inside and out, with 5mm 069 translucent white
acrylic faces. Letter backs to be white sprayed Additionally, apply a white strap line 50mm wide
aluminium. with 30mm returns, otherwise constructed as the
tile logo and letterset.
The face of the tile logo to be decorated with
5-7 year vinyls to dense blue Mactac 9839-24
and dense red Multi Fix 7911.
The vinyl is to be stencil cut to show white dice
dots through. White 5mm border all round to
equal the gap between the red and blue vinyls.
The face of the tile logo is to be decorated with Timber Fascia Construction - no illumination
5-7 year vinyls to translucent blue Mactac 9738- 18mm exterior grade birch faced plywood
05 and translucent red Mactac 9758-06. Vinyl back panel complete with 20mm angled
is to be stencil cut to show the white dice dots timber frame all round, sealed, undercoated
through. White 5mm border all round, equal to and painted with two top coats semi-gloss grey
the gap between the red and blue vinyls. to match RAL 7043 Traffic Grey.
Install, with no visible fixings, to a sealed and
The tile logo and letterset are to be evenly weathered background.
illuminated by LED modules with all wiring and
drivers unseen. The strap line remains unlit in all
cases.
1.5.3 - 1.5.4 Fascias - Signage 3 February 2016
