Page 15 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual
P. 15

The  Principal  Contractor  must  arrange  for
          suitable power supplies to all signage. All cables
          must be concealed from view.

          1.5.2 Setting Out Guidelines


          In order to create the right proportions between
          the  lettering  and  logos  on  different  heights  of
          fascias,  the  following  guidelines should be
          adopted. In some cases the dimensions below
          may not  be appropriate and the  approved
          signage  drawings  should  be  referenced  for
          confirmation.     D R A F T


          General Setting Out
          Distance between logo and lettering 50mm
          Distance between bottom of logo       50mm
          and lettering to strap line
          Strapline to be positioned at the
          bottom of the fascia board
                                                                1.5.3 Internally Illuminated Fascia Signs
          Lettering and logo setting out
          Height of fascia   Distance        Distance           Internally  illuminated,  built-up  individual  letters
                             between top     between top        and  logo  are  always  the  preferred  option  for
                             of fascia to    of fascia to       fascia  signage.  These  will  be  mounted  on  a
                             highest point   the top of         2mm  aluminium  back  panel  formed  on  four
                             of tile logo    the ‘’i’’ in       sides with 25mm folded returns complete with
                                             Dominos.
          Band A – 500mm  50mm               100mm              20mm x 20mm internal aluminium fixing angle to
          to 800mm                                              top and bottom or 20mm up and downstands
          Band B – 800mm  100mm              200mm              depending  on  circumstances.  Panel  is  to  be
          to 1000mm                                             etch  primed  and  powder  coated  semi-gloss
          Band C – 1000 to  150mm            300mm              grey to match RAL 7043 Traffic Grey.
          1200mm
          For fascia’s above 1200mm, or less than 500mm,
          please refer to project drawings for specific
          details.








          1.5.1 - 1.5.3              Fascias - Signage                                      3 February 2016
   10   11   12   13   14   15   16   17   18   19   20