Page 49 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual

the cabinet height by a further 100mm.A F T

2.9.4 Drivers Station/ GPS Power and Data
The following power and data sockets are
required to be provided in the location of the
drivers routine station at the height of 1050mm
AFFL to centre line of socket:
• 1x Double Gang 13AMP red power socket
• 1x Double Gang CAT-5E data socket,
destination to office comms cabinet
• 1x Single Gang CAT-5E telecoms socket

A GPS charging cabinet is required to be
installed as part of the initiative for drivers. The
D R
cabinet dimensions are 211mm depth, 483mm
width and 850mm height (without wheels or
top handle installed). Should the cabinet be
provided with wheels the height would be
increased by 50mm and the handle increases

The maximum unloaded weight of a 10 bay
unit is 10kg whereas a 30 bay unit is 13kg.

Power for the GPS charging unit is via a 13AMP
standard mains lead into a switched socket
on the bottom of the cabinet. The charging
cabinet should be positioned close to the
drivers station or in the managers office as
agreed with franchisee (Project Manager).

2.9.4 Drivers Station / GPS Power and Data 3 February 2016