Page 54 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual
P. 54
3.1 Office
D R A F T
The full height, office ‘Comms Cupboard’ The cabinet will contain patch panels to enable
has been replaced by a slightly wider version the equipment to be plugged into the internal
with modified internal wiring, sockets etc. This network (patch panel to be wired by the site
cupboard will not only contain the IT equipment electrician) and a power bar which needs only
but also the CCTV equipment and possibly the to be plugged into a standard 13aS/S/O.
Phone system unit .
The patch panels and power bars will be supplied
Ideally it should be positioned adjacent to the as part of the counter and comms cupboards,
desk, exactly as in the past, however it is slightly to be wired only, by the site electrician.
wider and if it is not possible to sit it against the
desktop, it can be moved elsewhere. A detailed drawing for the comms cupboard
can be found here.
NOTE: That in this case, additional cables will need to be
run by the site electrician from the cabinet to the desktop.
3.1 Office 3 February 2016
