Page 17 - geneO X

TriPollar RF Handpiece Indication LED colors explained:
INDICATION
MEANING
Blue LED Light
Start button was pressed and treatment is in progress (RF energy is transmitted)
Note: When skin temperature reaches 40°C, the Blue LED changes to Green LED and RF energy transmission is halted to prevent skin overheating
Orange LED Light
Optimal skin temperature range was reached (37-40°C)
Green LED Light
The handpiece is in idle mode (it receives power from the platform, but RF energy is not being delivered)
Blinking Green LED Light
Settings are being loaded to the system, or treatment has been halted (operator pressed the 'start' button) and treatment parameters are being adjusted
Table 3: TriPollar RF Handpiece Indication LED colors explained
TriPollar RF Treatment Parameters
It is possible to control the treatment duration (maximum of 20 minutes).
The maximum RF output power of the system remains constant. The optimal skin temperature for the treatment will be reached when the ORANGE LED light turns ON.
TriPollar RF has 1 pre-defined default operating level of 100% RF output power and a default duration of 20 minutes.
TriPollar RF Treatment Procedure
1. It is recommended that the User Manual is thoroughly reviewed and understood by the operator, including the Safety Instructions and Contraindications, prior to viewing the TriPollar procedure video and prior to conducting the TriPollar treatment. The customer should be screened for suitability by utilizing the Customer Screening Checklist provided in Appendix D of this User Manual prior to conducting the TriPollar treatment.
Fig. 23
17