Page 19 - geneO X

Fig. 26
11. Use the slider on screen to manually adjust duration parameters. Slide up to increase and down to
decrease. The range of values depend on the operating duration level chosen.
Note: The recommended treatment time is up to 2 to 3 minutes for each treatment area. The total treatment session should not exceed 20 minutes.
Note: If a break is necessary during treatment, the TriPollar RF Handpiece may be temporarily placed on a sterile procedure pad. Once treatment is completed, the TriPollar RF Handpiece must be cleaned according to instructions in the User Manual prior to placing the TriPollar RF Handpiece into the handpiece cradle holder.
12. Select the TriPollar RF Handpiece from the Cradle (Fig. 27), press the “start” button on the handpiece (circled in Fig. 28) to switch it ON and begin treatment. The light will change from GREEN LED to BLUE indicating the handpiece is active. The remaining time will show inside a circle on screen (Fig. 29)
Fig. 27 Fig. 28 Fig. 29
13. Place the handpiece on the skin. Make sure all 4 electrodes are in full contact with the skin during the entire treatment, as shown in Fig. 30. Constantly Move the handpiece in circular or eight shaped motions while applying mild pressure on the skin.
Fig. 30
19