Page 183 - 3M ELECTRICAL PRODUCTS CATALOG - 596-PAGES

IronwoodPremium_474114_Catalog-On-Demand4.QXD 6/16/2015 11:35 PM Page 184

3M™ Cold Shrink Splice Kits

3M™ Inline Splices for 3/C or 4/C Armored Power Cable (Teck-90) 5730 Series

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of
3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.
3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from
0.62–4.00” (16–102 mm).
Notes
2 Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731
series.
2 Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.

Voltage 1000 V or less
Number of Conductors Multiple Conductor
Cable/Shielding Type Armor Power Cable (Teck 90)
Splice Type Inline
RoHS 2011/65/EU Yes

Agency Approvals Certified for 600 V or less
CSA Approved for use in the United
States and Canada

Number of
Order No. UPC Voltage Conductor Size Overall Jacket Diameter Amount of 3M™ Armorcast Required Case Qty.
Conductors
5730 054007-43171 0–600 V 14–10 AWG 0.62”–1.00” 3/C or 4/C 1 roll 1
(15,7–25,4 mm)
5731 054007-43172 0–600 V 8–4 AWG 0.95”–1.40” 3/C or 4/C 1 roll 1
(24,1–35,6 mm)
5732 054007-43173 0–1000 V 2–1/0 AWG 0.95”–2.40” 3/C only 1 roll 1
(24,1–61,0 mm)
5733 054007-43174 0–1000 V 2/0 AWG–250 kcmil 1.15”–3.30” 3/C only 2 rolls 1
(29,2–83,8 mm)
5734 054007-43175 0–1000 V 250–500 kcmil 1.55”–4.00” 3/C only 2 rolls 1
(39,4–101,6 mm) 3/C only 3 rolls 1
1.55”–4.00”
5735
054007-43176 0–1000 V 500–750 kcmil
1000 V or less
(39,4–101,6 mm)

Low Voltage Splices,

184 FAX: 800-245-0329