Page 416 - Installation Training Binder FIT1-3

Setup Instruction for Retrofit Installation

A “Retrofit” is defined by EnviroGuard as a spill containment installation
where the battery rack has been installed.

Tools Required for Installation

• Anchor Setting tool (Provided)
• Caulking Gun (Provided)
• Chalk Line
• Duct Tape
• Double Stick Tape
• Utility Knife with Regular or Hook Blades
• Side Cutters (Snips)
• Throw-away Latex Gloves
• T-Square or Straight Edge (at least 4” long and preferably non-metallic)
• Measuring Tape (non-metallic)
• Marking Pen
• Thermal Bonding Tool Kit W/ Approved Heat Gun (Figures 1, 2 and 3)

Figure 1 Figure 2 Figure 3

A. Site Survey
1. Check for Obstructions (Figure 4)

Figure 4

EnviroGuard 800-206-9884 Fax 909-624-1772 www.egsintl.com

10/08 rev. A Hawk System Retrofit Installation Setup Instruction - 3 -