Page 274 - CRESTRON HOME OS-3

o Common Device Password: Set using the Crestron Home Setup app. The common
device password is assigned to the device by the Crestron Home processor.
l Advanced User Credentials: Used to access the setup and configuration screens for the
system. The Advanced User credentials give the homeowners limited access to the setup
and configuration screens on the system.
o Advanced User Username: The advanced user username is "advanceduser". This
username cannot be changed.
o Advanced User Password: Set using the Crestron Home Setup app.

Crestron Home App password:

l User Interface Device Password: Allows user interface devices (TSW-xx60 series touch
screens, TSR-310 handheld remotes, iOS® devices, and Android™ devices) to join the
Crestron Home system. User interface devices cannot connect to the Crestron Home
system if the User Interface Device Password is not set. To set the User Interface Device
Password, refer to Set or Change the Advanced User Password (on the facing page).

NOTES:
l After three unsuccessful login attempts, the IP address of the device is blocked from
joining the Crestron Home system for 1 hour. Other devices are allowed to join during this
period.
l Create passwords using any combination of letters, numbers and symbols (ASCII-
standard characters only, accents and accented characters are not supported).
l All passwords must be unique.
l Use Crestron Toolbox™ software to manage blocked IP addresses, change the password
policy, and change the maximum login attempts.
l To reset passwords, refer to Reset Passwords (on page 278).

Change the Admin Password

The Admin password is used to allow access to set up and configure the Crestron Home
processor. The admin username and password are set by the dealer during the initial processor
setup or after the passwords are reset.

To change the Admin password:
1. Tap Change to set a new Admin password. A pop-up dialog box is displayed.
2. Enter a new password.
3. Tap OK to confirm the change to the password.

CAUTION: Once an admin password is set, installer configuration mode may not be accessed
without entering the password.

274 • Crestron Home™ OS Product Manual — Doc. 8525Z