Page 278 - CRESTRON HOME OS-3

Reset Passwords

Passwords can be reset to their factory default setting if a password is lost or if the system is
transferred to a new owner.

NOTES:
l The Admin username and all other users are removed from the system.

l When the passwords are reset, the system displays a prompt to enter a new Admin
username and password.
l The Advanced User, User Interface Device, and Common Device passwords must be set
manually.

To reset the passwords:

1. Press and hold the SW-R button on the Crestron Home processor (about 15 seconds) until
the MSG LED flashes rapidly.
2. Set the Admin username and password in the Create Admin Account dialog box.
3. Set the Advanced User, User Interface Device, and Common Device passwords:

NOTE: To change the Admin password, refer to Change the Admin Password (on
page 274).

l Advanced User password: Refer to Set or Change the Advanced User Password (on
page 275).
l User Interface Device password: Refer to Set or Change the Advanced User
Password (on page 275).
l Common Device password: Refer to Set or Change the Common Device Password
(on the previous page).
System Information

The system information is used to describe the name of the system and to provide information
about the dealer that set up the system.

NOTE: Ensure that the dealer information is kept up to date, as this information is needed to
place custom engraving orders through the Crestron Home system.

l System Name: Enter a name for the system. For example, the homeowners name or
address.
l Dealer Name: Enter the Crestron dealer responsible for the system installation.
l Dealer Phone #: Enter the phone number of the Crestron dealer responsible for the system
installation.
l Dealer Email: Enter the email address of the Crestron dealer responsible for the system
installation.

To return to the previous screen, tap Back.

278 • Crestron Home™ OS Product Manual — Doc. 8525Z