Page 276 - CRESTRON HOME OS-3

2. Enter the required credentials for the Admin in the Admin Username and Admin Password
fields and then enter the User Interface Device password in the UI Device Password and
Confirm Password fields.
3. Tap OK to continue or Cancel to exit without saving changes.

Change the User Interface Device Port (Local Port)

The Crestron Home system uses port 50001 for communication between the Crestron Home
processor and the User Interface Device. The port used for communications can be changed if
port 50001 is in use by the ISP and cannot be forwarded.

To change the User Interface Device Port (Local Port):
1. Enter the port number into the Port field.
2. Change the port on all user interface devices. For details, refer to Pair User Interface
Devices (on page 647).

276 • Crestron Home™ OS Product Manual — Doc. 8525Z