Page 330 - CRESTRON HOME OS-3

3. Select a room from Select Room Below and then tap the check box next to the lighting
loads that should be controlled in the lighting scene.

NOTE: The lighting loads can be from the same room or from different rooms in the
house.

4. Configure the lighting scene:

l Lighting Loads: Use the provided controls to adjust the brightness levels for any
lighting loads that have been added to the scene. Lighting loads are adjusted in real
time.

o Tap the left lightbulb button to turn off a lighting load (0%).
o Tap the right lightbulb button to set a lighting load to its maximum
brightness (100%).
o Use the slider to adjust the brightness level incrementally for lighting loads
with dimmers.

NOTE: Lighting loads may also be adjusted using the dimmers or switches
configured to control the lighting load. The load levels are updated in real-time in
the system.

l Fade Time: Select the duration that a lighting scene fades in after being recalled
and fades out after the scene is completed.
5. Tap Save to save any changes or Cancel to discard the changes.

330 • Crestron Home™ OS Product Manual — Doc. 8525Z