Page 529 - CRESTRON HOME OS-3

Create a Fixture

Add fixtures to the fixture library to quickly add loads to the configuration.

To add a fixture, perform these steps:

1. Click Fixture Library.
2. Enter the information for the light fixture in the Add to Fixture Library dialog:

a. Enter a name in the Fixture Name box.

b. Select a load type from the Load Type drop-down menu. The default is ELV/LED.
c. If the fixture is dimmable, select Dim and then enter the minimum and maximum
dimming level of the fixture in the Lower Limit (%) and Upper Limit (%) boxes.

d. Enter the watts of the fixture in the Fixture Watts box.
e. Enter the type of fixture in the Fixture Type box.
f. Enter the manufacturer name, model, and description in the Manufacturer,
Model Number, and Description boxes.
3. Click + Add Fixture.

Add a Load using the Fixture Library

To add a load to a room using the fixture library, perform these steps:
1. Select a room from the Room Name drop-down menu.
2. Enter a name for the load in the Load Name box. A list of common names is displayed as
the name is typed. Press Tab on your keypad to choose the current selection.
3. Select a fixture from the Fixture Type drop-down menu. The remaining fields are
populated using data stored in the fixture library.
4. To add the fixture, click + Add or press Enter on your keyboard.

NOTE: To quickly add several loads using the same fixture, select a room, enter a load
name, and then press Enter on your keyboard.

Product Manual — Doc. 8525Z Crestron Home™ OS • 529