Page 532 - CRESTRON HOME OS-3

Equipment Tab

Add lighting equipment to the configuration and configure them using the Equipment tab.
You can add and configure:

l Enclosures (below)
l Modules (on page 538)
l Assign Loads to Modules (on page 540)

Enclosures

Use enclosures to mount centralized CAEN and DIN modules in the system. You can add, edit,
change the enclosure layout, and remove enclosures.

Add an Enclosure
To add a an enclosure, follow these steps:

1. Click Add Device.
2. Select Enclosure from the Type drop-down menu.
3. Select an enclosure type from the Model drop-down menu. The menu is arranged by
Crestron CAEN Enclosures, Crestron DIN Enclosures, and Generic DIN Enclosures.
For Generic DIN Enclosures, select the number of DIN rails in the enclosure and the
number of slots for each rail.

4. Select a room from the Room drop-down menu.
5. Enter a name in the Name field.
6. To add the enclosure, click + Add. To exit, select Close.

532 • Crestron Home™ OS Product Manual — Doc. 8525Z