Page 530 - CRESTRON HOME OS-3

Add a Load using Manual Entry

To add a load to a room, perform these steps:

1. Select a room from the Room Name drop-down menu.
2. Enter a name for the load in the Load Name box. A list of common names is displayed as
the name is typed. Press Tab on your keypad to choose the current selection.
3. Enter label for the circuit in the Circuit Number box.
4. Select a load type from the Load Type drop-down menu. The default is ELV/LED.
5. Enter the number of fixtures on the load and the watts for each fixture in the Fixture Qty
and Fixture Watts box.
6. If the fixture is dimmable, select Dim and then enter the minimum and maximum dimming
level of the fixture in the Lower Limit (%) and Upper Limit (%) boxes.
7. To add the load, click + Add or press Enter on your keyboard.

NOTE: To quickly add several loads using the same values, select a room, enter a load
name, and then press Enter on your keyboard.

Edit a Load

The details of the load can be changed after the load is created.
To edit a load, perform these steps:

1. Select a load and then click Edit.
2. The line-item in the load schedule displays the fields that can be changed. Make the
necessary changes to the load.

NOTE: If the load was added using the fixture library, only the Room, Load Name, and
Fixture can be changed.

3. To save the changes, click Update.

530 • Crestron Home™ OS Product Manual — Doc. 8525Z