Page 831 - CRESTRON HOME OS-3

Surround Speakers

In the Sonos app, it is possible to assign two PLAY:1, PLAY:3, or PLAY:5 speaker devices as
surround speakers for a Beam, PLAYBAR, or PLAYBASE device.

The two speakers that are selected as surround speakers are hidden in the Sonos app and may
no longer be controlled.

If any of the surround speakers were assigned in the Crestron Home system, a pop-up dialog is
displayed stating the Sonos device was added as a satellite device to the Beam, PLAYBAR, or
PLAYBASE device.

Pair Devices Screen - Sonos (Speaker1 Offline)

Line-Out Configuration

For a Sonos CONNECT device, the line-out settings may be set as Variable or Fixed:
l Variable: The volume level of the line-out output may be controlled.

l Fixed: The volume level of the line-out output is set to 100% and may not be controlled.
Depending on the device type that was chosen when assigning a Sonos device in the Crestron
Home system, observe the following points:
l Source

o A source device type is used for a CONNECT device that is connected as an input to
an audio receiver.
o The line-out setting for source devices should always be set to Fixed, as the audio
receiver is used for volume control.

814 • Crestron Home™ OS Product Manual — Doc. 8525Z