Page 960 - CRESTRON HOME OS-3

l Disconnect the Amazon® Alexa® voice control account or the Google Assistant™ voice
control account prior to transferring data. To remove voice control service, refer to
Remove Voice Control Services (on page 316).

NOTE: The homeowner's Amazon or Google credentials may need to be entered to
unregister the old processor.

Transfer Data
To transfer data with a Deploy code, generate a Deploy code from the old processor and then
set up the new processor using the Deploy code.

Generate a Deploy Code
To generate a deploy code, follow these steps:
1. Go to portal.my.crestron.com.

2. Select Devices and then select the processor.
3. The Deploy code is displayed in the system information. To create a new Deploy Code,
select Generate Deploy Code.

NOTE: The deploy code expires after 14 days.

4. Write down or copy the Deploy Code.

Set Up the Crestron Home System using a Deployment Code
To load the configuration onto a Crestron Home processor:

1. Open the Crestron Home Setup app and then connect to the Crestron Home processor.

NOTE: If the Crestron Home Setup app does not connect to the Crestron Home
processor automatically, enter the Crestron Home processor's hostname and select
Connect. The default hostname for a Crestron Home processor is "[Product-Name]-
[MAC Address]" (excluding punctuation). For example, "CP4-R-123A567B91C3." The MAC
address label is located on the bottom or rear of the device.

Product Manual — Doc. 8525Z Crestron Home™ OS • 943