Page 964 - CRESTRON HOME OS-3

8. The configuration is downloaded from the myCrestron Residential Monitoring Service and
then displays the system information. To load the system onto the Crestron Home
processor, select NEXT.

NOTES:

l The Step 7: Loading System Information screen is displayed while the system
information is loaded onto the Crestron Home processor.
l The system information is typically loaded to the Crestron Home processor very
quickly. The Step 7: Loading System Information screen may be visible for a very
short period of time.

9. The Crestron Home processor restarts after the system information is fully loaded onto
the Crestron Home processor.
10. Update the hostname for the replacement Crestron Home processor.

The hostname on the replacement control processor must match the hostname of the
control processor that was written down during the Generate a Deploy Code (on
page 943).

a. Go to Settings > System Configuration > Ethernet Settings to view the Ethernet
Settings screen.
b. Enter the hostname in the Host Name box.
c. Select Done and then OK to confirm. The Crestron Home processor applies the new
Ethernet settings and then reboots.
11. Reboot the router, IP network devices, and then Wi-Fi network devices to restart the DNS
server and resolve the hostname with the new Crestron Home processor.

Product Manual — Doc. 8525Z Crestron Home™ OS • 947