Page 965 - CRESTRON HOME OS-3

12. If necessary, add the CEN-GWEXER to the system. For details, refer to Add an infiNET EX
Wireless Gateway (below).
13. If necessary, register the Crestron Home processor with an Amazon® Alexa® voice control
account or a Google Assistant™ voice control account. For details, refer to Voice Control
Settings (on page 311).

Add an infiNET EX Wireless Gateway
When a Crestron Home processor that has an internal infiNET EX wireless gateway is upgraded
to a Crestron Home processor that does not have an internal infiNET EX wireless gateway (for
example, a PYNG-HUB to a CP4-R) the data from the internal infiNET EX wireless gateway is
stored on the new processor in a Virtual Gateway. When a new infiNET EX wireless gateway is
installed and added to the system, the data is transferred from the Virtual gateway to the new
gateway.

IMPORTANT:

l Transferring data from a Virtual Gateway to a wireless gateway (CEN-
GWEXER or the internal wireless gateway in an MC4-R) can be performed once
per gateway.
l To make sure that the Virtual Gateway data can be transferred, the wireless
gateway should be factory fresh.

To add a new gateway to the system and replace the Virtual Gateway, follow these steps:

NOTES:
l The CEN-GWEXER must be running the latest firmware. To update the firmware, refer
to Update Device Firmware (on page 322).
l If the CEN-GWEXER was transferred out of a system, the CEN-GWEXER must acquire
devices manually. Refer to Pair Crestron infiNET EX Devices (on page 50) for details.
l Data from the gateway must be transferred to an identical model gateway (for
example, from a CEN-GWEXER to a CEN-GWEXER).
l Verify that no USB connections are made to the CEN-GWEXER.
l Verify that Crestron software (for example, Crestron Toolbox software) is not connected
to the CEN-GWEXER via USB or Ethernet cable.

1. Tap Pair Devices on the Setup screen or the Pair Devices button on the setup menu to
display the Pair Devices screen.

948 • Crestron Home™ OS Product Manual — Doc. 8525Z