Page 21 - Catalogue ANGLAIS 2016_Neat

Water level probe model INO

CHARACTERISTICS

Range :
30, 50, 80, 100, 150, 200,
300, 500 m

Graduations :
Centimeter

Accuracy :
According to graduations

Power supply voltage :
4 piles de 1,5 V (R-14)

Probe diamater :

APPLICATIONS
APPLICATIONS 15 mm
The water level probe model INO is employed to
measure any relative level of water in a drilling or Probe lenght :
outdoors. From 190 to 210 mm

It is used for the control in average or long-term the limnimetric
levels near hydraulic works (dams, dikes), or groundwater level Cable body :
for which the presence of water has a strong impact (landslides, Polyetylen
alveoli of storage).
Probe body :

DESCRIPTION Chromed brass
The water level probe model INO is composed by a cylindrical
reel, by a flat cable and by a probe in brass.
Weight :
The water penetration in the probe closes the electric circuit of 5 kg (with 50m cable)
the device and activates an alarm and/or a lightening signal
which lasts as long as the probe stays in the water.
The direct reading thanks to the graduations on the cable allows
to know with accuracy the exact water level compared with the
point where the operator stands.

The probe outside body, cylindrical in brass, allows to use it in
difficult environmental conditions while protecting its mechanical Options :
integrity. The semi-stiff flat cable contains two high-strength Graduations in mm
stainless steel threads. Its section was designed to offer Temperature measurement
resistance against damage.

This probe, which allies a small dimensions to an easy use, is Accessories :
composed by non-corrosive components and elements which Spare battery
allow its use according to all the current environmental Bag for transport
standards.

This document is on no account contractual; Géo-instrumentation reserves the right to modify its products and its data sheets without advance notice.

Géo-Instrumentation - S.A.S. au capital de 37000 € - RCS Créteil B502768427 – APE : 7490B - N°TVA : FR10502768427