Page 19 - Catalogue ANGLAIS 2016_Neat

Measure of flows by capacity model CAP-4 & CAP-10

CHARACTERISTICS

CAP According to
planned flow:
CAP-4 from 0,1 to 4 L/mn
CAP-10 from 0,5 to 10 L/mn

Accuracy
From 1 to 2 %
(Depending on the measured
flow)

Measuring time
30 seconds
(compulsory time)
A
APPLICATIONS PPLICATIONS
The measure of flows by device in reservoir is employed to
quantify a flow of drainage or leaks passing outdoors. Weight
CAP-4 1 kg

CAP-10 1,5 kg
It is mainly used in the follow-up of the hydraulic works( Dams,
dikes), and where the drainage of the present water has a
strong impact (mines, landslides …). Dimensions
CAP-4 350 x 140 x 100 mm
DESCRIPTION CAP-10 490 x 170 x 130 mm

The device is a mobile parallelepipedic tank in polyvinyl chloride
shock (PVC) containing a gradual transparent side.

It is specially designed to be able to, when it is placed in Options :
horizontal position, collect the water passing by a leak or a None at this day
drain.
The simple fact of placing it then in vertical position allows to
read, thanks to graduations of the transparent side, the flow of
the collected water. Accessories:
chronometer
A handle of transport integrated into the device allows to make

this change of position easier allowing the readings. It is besides
a help to the on-site transport of the device.
Every capacity is individually controlled after manufacturing. The
sheet of control supplied with every device allows to guarantee
its conformity with the standards required on this typeof device
made under license.
Its simplicity of use and transport make this device an essential MATÉRIEL UNDER EDF LICENCE
tool to the favorable monitoring of the flows of the leaks of a
work.

This document is on no account contractual; Géo-instrumentation reserves the right to modify its products and its data sheets without advance notice.

Géo-Instrumentation - S.A.S. au capital de 37000 € - RCS Créteil B502768427 – APE : 7490B - N°TVA : FR10502768427