Page 7 - Catalogue ANGLAIS 2016_Neat

Horizontal inclinometer measuring system model INCLISONDE-H

CHARACTERISTICS

Measuring Range :
500 mm

Accuracy :
0.01 mm par 500mm de tube

Repeatability :
0.01 % PE

Range :
+/-30°from the horizontal line

Probe length :
845 mm
A
APPLICATIONS PPLICATIONS
The horizontal inclinometer measuring system model Probe diameter :
INCLISONDE-H is employed to control the stability and to 42 mm (without wheels)
measure any vertical movement of ground or structure where
the inclinometric tube is installed. Temperature of use:
-10 à +60°C
It is used to control in average or long-term grounds and works

requiring either a follow-up of the ground breath movements, or Temperature of storage:
a supervision of the movements engendered by the construction -20 à +70°C
of a building under with the horizontal tube is placed most of
the time.
DESCRIPTIF ESCRIPTION
D Permeability :
The INCLISONDE-H system is composed by three elements: IP68
The inclinometric probe made in stainless steel, perfectly
waterproof. Two pairs of small wheels allowing to adjust the Cable :
From 30m, 50m to 100m long
inclinometric standard tube size. The sensor of the probe is a
monoaxial accelerometer Mems. It increases the resolution of (Other possible length)
the device, confers it a high resolution, increases its stability, System scale :
and supplies it with a compensation system that will deal with In cm or 50xsinƟ
the small variations due to the temperature. (other possible scale)
The mobile reading unit provided with a recording memory
allows to measure accurately the probe slope, to record data Dispay unit:
LCD liquid crystal displays
and store information corresponding to the various sites and
drillings on which the measures are made.
Accessories :
Its internal memory allows to store more than 300 measures for System with cable to pull the
long tubes of 100m on average. probe in horizontal line
Transporting case
The cable is marked every 0,50m and ends by tight connectors
installed at the manufacture. The steel material allows to Dummy probe with cable
minimize its stretching.

This document is on no account contractual; Géo-instrumentation reserves the right to modify its products and its data sheets without advance notice

Géo-Instrumentation - S.A.S. au capital de 37000 € - RCS Créteil B502768427 – APE : 7490B - N°TVA : FR10502768427